Other Devices

TriboRoll

Friction measuring device

  • Easy to use hand operated friction measuring device

  • The position of the measuring wheel can be set in five different angles on the running and on the guiding surface of the rail

  • The measuring software calculates friction coefficient from the measured forces and stores it in data-file

  • PDF protocol can be generated from the measuring results

  • The TriboRoll helps to set the optimum lubrication and friction coefficient

DSC_4201 low.JPG
DSC_0117 másolat.jpg

Metal Lube

Rail lubrication device

  • The wear appearing on the surface of the rail-train wheel connection and the emitted noise value can be reduced by applying of this rail lubrication device 

  • The system can be applied on CWR tracks and on traditional tracks as well 

  • Environmentally sound lubricant and solar power supply are available

  • Protection against vandalism is provided

  • The lubricant emission is controllable

Metal Lube LC

Cartridge lubrication device

  • It is suitable for greasing check rail

  • It reduces wear evolvement

  • It can be installed and changed easily

  • Emission periods can be changed during operation

  • Operation can be stopped and resumed without any limitations

  • Operation is guaranteed between -20°c and +55°C

IGB15

iTest

Insulated joint meter device

  • iTest is suitable for measuring insulated joints and it is capable of executing resistance measurement in the active status of the built-in insulated joint without disturbing the safety installations

  • The values are displayed in ‘ohm’ and the qualification is written under the measured value

CRG

Checking pattern for rails

  • Pattern set for checking of rail profiles at delivery 
    according to EN 13674-1:2011+A1:2017 standard

  • Checking pattern sets ease quick and professional geometric checks

  • The patterns are made of stainless material

  • One set has 17pieces of patterns

Topometer RLY14

Digital Distance Wheel

  • The device can be applied for measuring the distance between two points on the rail

  • Measuring range: 9999.99 m

  • It can be transported comfortably and easily in folded position

RA90

Rail square

  • The device can be applied for checking the rangle between sleeper and rail in the rail track

  • It is light, stable and its design assures electrical insulation, its use does not cause engagement in the rail track

  • It can be transported comfortably and easily in folded position

SBC Y14

Switch Blade Contact Angle Gauge

  • SBC Y14 is applied in many countries to check the connecting angle between switch blade and rail wheel

  • The measuring gauge can be found on both ends of the device so it is not necessary to move the device when the turnout is switched

  • It is light, stable and its design assures electrical insulation, its use does not cause engagement in the rail track

SBW Y14

Switch Blade Wear Measuring Gauge

  • SBW Y14 is applied in many countries to check the connecting rate between switch blade and rail wheel 

  • It is light, stable and its design assures electrical insulation, its use does not cause engagement in the rail track

IGB15

Insulated gauge corrector bar

  • It is an electrically insulated device for the exact hand adjustment of the gauge (reduction and extension)

IWD

Rim back distance measuring device

  • IWD is a mechanical device, it can measure whether the distance between the rim back of wheels remains in the acceptable range

  • The value can be viewed on micrometre

IWD.jpg
WGD.JPG

WGD

Flangegauge distance measuring device

  • WGD is a mechanical device, it can measure whether the flangegauge remains in the acceptable range

  • The indication can be read on caliper

 
 

T: +36 1 371 2290    F: +36 1 371 2292

Budapest, Borszék köz 13, 1119 Hungary

©2018 by Metalelektro Measuring  Technique Ltd.