ARCHIVE
09/10/2023 - Open day
We are looking forward to seeing you at our Open day on Thursday, October 26th from 9:00 AM, at our location:
13. Borszék köz, 1119 Budapest.
​
Please indicate your interest in participating using the following contact details:
info@metalelektro.eu or +36 1 371 22 90.
-
It measures the wheel diameter according to the special version three-point chord measurement principle.
-
It can be used the entire range of the common wheel types from 330 mm upto1400 mm diameter!
-
This device provides convenient usage on the field and in the installation shaft too!
​
Click on the YouTube logo for video please!
​
The ’D-WHEEL’ is in the details!
-
The DIVA 700-B 1000 mm gauge version uses digital technology similar to its predecessors to measure the 3 main track parameters and some additional parameters.
-
It is available with a display, but also with Android-based software to control the measurement process and store the measurement results on an Android phone.
-
84 pieces of MetalLube rail lubrication device have been delivered successfully
-
Special online monitoring system has been put into operation
-
Remote control solution
-
Training of the local team has also been done
17/03/2023 V-Tanú - the video witness of the railway barrier break
V-Tanú records what happened in the vicinity of the railway crossing under the red signal.
In the event of a barrier break, the recording is preserved without overwriting.
Based on the recording, the license plate number of the vehicle can be recognized, so the crime can be proven.
V-Tanú sends an SMS to designated professionals and the police when the barrier is breached.
If the barrier is not broken, the recording is automatically overwritten to the next red signal.
Click on the YouTube logo for video please!
DIVA 700-B measures the 3 main track parameters via digital technology.
The DIVA 700-B provided with OLED display. At the same time Android based software is also available for controlling the measuring process and for storing the measuring results on Android phone.
DIVA 700-B is also available in dual format. I.e. this version of the device can be used for different track gauges such as 1435/1668mm or 1435/1520 mm!
Click on the YouTube logo for video please!
The WearCheck 45-S is an easy-to-use, hand operated rail height and side-wear (22,5; 45 and 67,5 degree) measuring equipment.
Thanks to its special mechanical preparation it is possible to measure the wear values with WearCheck 45-S in curve at guard rails as well!
05/11/2022 HeadCheck measuring service was done in Budapest Metro by GFD-08
The 8-channel, HeadCheck measuring device was towed by a diesel power car with 25km/h speed on the line of Budapest Metro during night shift
06/10/2022 Short introduction videos about our devices
​
The above videos could be seen after click on the titles:
​
short films about our measuring equipment (10:34)
​
​
23/06/2022 Unilaser-T
the clearance gauge on tram-train line!
-
Contactless measurement
-
More available types of clearance: railway/city railway
-
Curve correction
-
Platform measurement
-
Distance measurement between points
-
Detection of vegetation overgrowth
​
Please click on the picture for YouTube video!
02/05/2022 WPCS - Wheel Profile measuring device!
WPCS measures and calculates the width and height of the wheel flange, the diameter of the wheel, the outer radius of the wheel flange, the angle of the wheel flange, the angle of the rolling surface, the wear of the rolling surface and the
wear of the flange (inner and outer side).
​
Please click on the picture for YouTube video!
03.03.2022. LILI – Laser Inspection in Long distance for detecting Irregularities of the rail track
-
A pushable measuring unit in the track which measures distance and superelevation.
-
A laser source fixed on the rail max. 40 m from the unit
-
An air mouse, which can determine and record the location of the laser spot on the PC.
For YouTube video, please click on the picture!
03/02/2022 CHORD-2 – VERSINE measuring device
-
Digital VERSINE measurement on 2 meter base
-
Radius of the curvature calculation on 2 meter base
-
Smart solutions and WEB application in use
-
Quick measurement
For more details please click on the picture!”
16/01/2022 Please watch the short YouTube video about the measuring tram of Budapest Transport Company provided with our solutions as follows:
-
Inertial sensor-based, vehicle-dynamic measuring system
-
Complex catenary diagnostic system
-
Optical track gauge measuring system
​
Click on the photo and watch the video!
​
2/01/2022 DIVA – Metalelektro introduces his digital track geometry measuring gauge
DIVA measures three track features via digital technology:
-
Track gauge
-
Check-rail gauge
-
Super-elevation​
​
For more details please click on the picture!”
30/07/2021 Laser Distance Gauge:
measuring device for determining the position of the track to a fix object
​
The height position of the guiding point of the rail can be marked on a fix object, as well as its distance from the object can be measured by the device.
​
Click on the photo and watch the video!
25/06/2021 HCscanHD hand operated, HeadCheck measuring device is available!
The original HCscan device - which is used world-wide with high level of customer satisfaction - is improved with the following functions:
​
-
The vision scope of the probe is narrower so it can identify up to 500 cracks per meters
-
4 different material qualities can be measured
-
The measuring results can be saved onto an SD card.
Click on the photo and watch its introduction video!
21/04/2021 We hereby present our new product, the WearCheck measuring device!
It measures the wheel flange’s thickness, height, and qR dimension
21/10/2020 We updated our TriboRoll friction measuring device.
New measuring program provides more accurate measuring results with low dispersion.
The computer’s position and connection meet more precisely with the costumers’ demands
We doubled the number of optional measuring positions.
​
Please, click on the picture for the video of operation!
03/08/2020 Newly developed ceramic body of Head Check measuring probes
​
We provide HeadCheck measuring probes with advanced wear resistant ceramic sliding collar!
​
We undertake to develop and produce unique ceramic bodies with built in eddy current sensors.
04/06/2020 New products
We are developing continously!
​
The descriptions of our new developments are available on our website, click and check the devices!
​
27/10/2019 Measuring service during rail grinding activity in night time
We have started our serial production but we also keep on developing our devices. We are testing our devices via measuring services. We improve our devices and software based on acquired experiences. Therefore, we are able to increase reliability and accuracy continuously. Our engineers have spent more than 40 nights in rail tracks recently measuring Head Check defects, and measuring rail profiles before and after grinding activity.
Devices: HCscan, GF04, GF08, RPCS.
Click on the picture for video!